- Do the following:
- Review with your counselor the first aid for injuries or illnesses that could occur while working on the Whitewater merit badge, including hypothermia, heat reactions, dehydration, insect stings, blisters, bruises, cuts, and shoulder dislocation.
- Identify the conditions that must exist before performing cardiopulmonary resuscitation (CPR) on a person. Explain how such conditions are recognized.
- Demonstrate proper technique for performing CPR using a training device approved by your counselor.
- Do the following:
- Review and compare BSA Safety Afloat and the American Whitewater safety guidelines and demonstrate your understanding of these principles by answering questions from your counselor.
- Identify and explain the use and importance of safety equipment on moving water. Include in your explanation a discussion about throw ropes, whistles, and how to choose and properly fit PFDs (personal flotation devices) and helmets.
- Before doing requirements 4 through 13 earn the Canoeing merit badge if you will be using a canoe to earn this merit badge. If you will be using a kayak, earn the Kayaking BSA Award.
- Do ONE of the following:
- If you are completing these requirements as a tandem canoeist, demonstrate basic canoe-handling skills by completing the Scout gate test within 160 seconds while paddling tandem with a buddy. Then demonstrate the following strokes: cross forward, cross draw, bow pry, Duffek, high brace, and low brace,
- If you are completing these requirements as a solo canoeist, demonstrate basic solo canoe-handling skills by completing the Scout gate test within 160 seconds. Then demonstrate the following strokes: cross forward, cross draw, stern pry, Duffek, high brace, and low brace.
- If you are using a kayak to complete these requirements, demonstrate
basic kayak-handling skills by completing the Scout gate test within
160 seconds. Demonstrate the following strokes: Duffek, high brace,
low brace, and sculling draw. Then do the following:
- Move the kayak forward in a reasonably straight line for 10 yards.
- Move the kayak sideways to the right and to the left.
- Pivot 360 degrees to the right and left.
- Stop the kayak.
- Do the following:
- Explain the importance of scouting before committing to running a rapid, and discuss good judgment when evaluating a stretch of river or a particular rapid.
- Explain the terms downstream V, riffle, strainer, eddy, eddy line, pillow, ledge, bend, shallows, falls, low-head dam, current, rock, drop, horizon line, wave, standing wave, hydraulic, and sleeper.
- Explain how to scout and read a river while ashore and while afloat, and discuss the importance of hazard recognition.
- Demonstrate your ability to read the river where you are practicing and demonstrating your whitewater skills.
- Explain the International Scale of River Difficulty and apply the scale to the stretch of river where you are practicing and demonstrating your whitewater skills. Identify the specific characteristics of the river that are factors in your classification according to the International Scale.
- Explain the importance of communication during every whitewater outing. Explain and then demonstrate using the following river signals: "Run right," "Run left," "Run down the center," "Stop," "Are you OK?" and "Help!"
- Do the following:
- Explain the differences between flatwater and whitewater canoes; identify the advantages and special uses for kayaks and decked canoes in running water. Identify the different materials used in modern whitewater canoe construction and the advantages and disadvantages of each.
- Describe the various types of kayaks and how they differ in design, materials, and purpose.
- Identify the advantages and special uses for kayaks and decked canoes in moving water.
- Discuss the construction, safety, and functional features of paddles used in whitewater activities.
- Discuss the personal and group equipment necessary for a safe whitewater outing and how and why it is used. Explain how to pack and protect these items.
- Wearing the proper personal flotation device (PFD) and being appropriately
dressed for the weather and water conditions, perform the following
skills in moving water in a properly equipped whitewater craft of your
choice (tandem canoe, solo canoe, or solo kayak). If a tandem canoe
is used, the skills must be demonstrated from both the bow and stern
- Launch and land.
- Paddle forward in a straight line.
- Sideslip, both sides.
- Ferry upstream and downstream.
- Eddy turn.
- Peel out.
- Explain and demonstrate:
- Self-rescue and procedures when capsized in moving water, including a wet exit if necessary
- Safe rescue of others in various whitewater situations situations using a throw rope.
- Portaging - when and how to do it.
- The whitewater buddy system using at least three persons and three craft.
- Discuss the use of inflatable boats on moving water. Discuss the use of inflatable rafts on moving water. In your discussion, explain the special safety precautions that should be taken when using an inflatable raft and the risks of "tubing" on moving water.
- Participate in a whitewater trip using either a canoe or kayak on a Class I or Class II river. Help to prepare a written plan specifying the route, schedule, equipment, safety precautions, and emergency procedures. Determine local rules and obtain permission from landowners and land managers in advance. Explain what steps you have taken to comply with BSA Safety Afloat and the American Whitewater safety guidelines. Execute the plan with others
Note to the Merit Badge Counselor:
Section 184.108.40.206 Qualifications of Counselors, in the 2013 Guide to Advancement (BSA Publication 33088 - SKU 618673) has specific special qualifications or certifications for either the merit badge counselor or the supervisor of certain activities that may be involved with the Whitewater Merit Badge, as follows:
Whitewater. Those supervising whitewater activities must be and certified as whitewater canoeing or kayaking instructors by the American Canoe Association or have equivalent certification, training, or expertise.
The instruction and experience necessary to complete the Whitewater merit badge requirements are intended to prepare the Scout for his initial whitewater experience. The objective is to introduce the skills and equipment with emphasis on safety and self-protection. A Scout earning this award will have taken the first step toward whitewater proficiency, but will achieve true proficiency only through further training and practice under proper supervision and conditions.
A Scout earning this merit badge should have a keen appreciation of the risks and precautions of whitewater sports to help ensure that future whitewater activity will be conducted in a safe manner. He must fully understand and appreciate the limits of his own ability and experience. A counselor who does not believe the Scout has reached this level of skill and understanding should not award the merit badge.
Whitewater instruction should follow all requirements, procedures, and techniques presented in this pamphlet. Supplemental Information and additional strokes should not be introduced until the basic requirements are met. The learning objectives emphasize safety and basic skills proficiency. It is the merit badge counselor's responsibility to follow all BSA safety policies, especially Safety Afloat and the safety guidelines set forth by American Whitewater.
On-the-water instruction and practice, including the whitewater trip specified in the requirements, should be limited only to rapids with a rating of Class I or Class II. The minimum time for training is that which leaves the Scout prepared. The time needed for the Scout to reach adequate proficiency will vary depending on several factors, including class size and previous flatwater skills. Plan on 15 to 20 hours of instruction and practice, plus the required trip. The instructor-to-pupil ratio should be kept small, around 8 to 10 Scouts per pair of instructors. A recommended merit badge course outline can be found in the aquatics section of the BSA publication Camp Program and Property Management, No. 20-920A.
A whitewater merit badge counselor must be designated by the local council service center. Persons trained as whitewater, canoeing, or kayaking instructors by the American Canoe Association, the American Whitewater, the U.S. Canoe Association, or by other agencies recognized by the BSA National Health and Safety Service are qualified for designation as Whitewater merit badge counselors. Persons currently trained as BSA Aquatics Instructors can assist local councils in planning for whitewater instruction and identifying whitewater counselors.
BSA Advancement ID#:
Requirements last updated in: 2006
Pamphlet Publication Number: 33405B or 35965
Pamphlet Stock (SKU) Number: 35965
Pamphlet Revision Date: 2005
Page updated on: July 26, 2013